Basic Info.
Automatic Production Line
Comprehensive
Rhythm
Flow Production Line
Item
PEE Pad Making Machine
Application
to Make Urine Pad
Packing Machine
Available
Type
Semi-Servo and Full Servo
Product Capacity
180meters/Min
Transport Package
Wonden Carton
Product Description
China Supplier Most Advanced Extrusion Cooling Pad Making Production Line Product Description
Main mechanical parameters for pee pad production line |
Product construction | 1) Cotton core, 2) PE back sheet, 3) Surface nonwovens, 4) upper paper tissue 5)under paper tissue |
Cotton core construction | Fluff pulp + SAP mix |
Product total length * total width | (450-1800) * 800CM |
cotton core total length * total width | (350-1200) * (500-700) |
Design speed | 230 m/min |
Produce speed: | 160-180m/min |
Production center distance | the distance from raw material center to the rack installation panel is 500mm |
Raw material distribution | Absorption layer on the surface ,back sheet is on the bottom. |
Product gram weight deviation | ± 5% |
Finished product rate | ≥ 97%(waste products caused by glue machine,splice material and material joint excluding) |
Working rate | ≥ 85% |
Pee pad production line produced pet pad have these advantages.1. The surface is made of high quality non-woven fabric, which can be rapidly absorbed.2. The interior is wood pulp and high polymer, the high polymer has a good absorption capacity, and the wood pulp firmly locks the internal moisture.3. Pet urination pads are generally made of high quality PE waterproof film, which is relatively strong and not easy to be scratched by dogs.Basic configuration: 1.Reasonable strong square steel frame, after cure/processing, the thickness of panel is 30mm,The machine panel had been six surface cure, Fixed framework is 40x40mm solid square steel, The panel is fixed with screws. base frame/bedframe uses 120x120x8mm square steel (according international standard),rear gearbox widened to 1100mm, make it convenience to maintain 2. Cotton core molding Toothed high speed pulverizer (soundproof room and electric wood pulp hoisting frame ) can smash untreated wood pulp and half processing pulp , and treated pulp , wood pulp feeding servo motor control. Double screw type polymer (SAP) device , servo motor (1 set) to control the amount of SAP. 3.Cotton core is molding in web wheel type , 1 set of mold , width is adjustable 4.The core coated:under paper tissue two side folding to wrapping the upper paper tissue and cotton core 5.Cotton pressure 6.Cotton grid compaction7.Cut off the cotton ,the tool rest is made of 45#steel. 1) Core cutter blade using alloy knife 2) Using inlaid alloy knife roller blade form 8.Upper paper tissue supply Double air swelling shaft, use half servo inverter drive (A/B shaft independent control,constant,tension control. Splice the tissue with working speed, automatically waste picked out. Material splice head, tail material automatic rewind Alarm and stop running automatically when the tissue broke. When detect the splice of the tissue,machine automatically waste picked out. Equip with automatic deviation correcting device (no.1), width is 500-700mm (Double electric eyes) Raw material size: width 500-700mm ,diameter≤800mm,roll diameter is 3inches. Configure the secondary tension Active feeding, servo control, the elastic tightness can be set on the touch panel. 9. Under paper tissue supply Top sheet non-woven supply: Double air swelling shaft, use half servo inverter drive (A/B shaft independent control,constant tension control. Splice the tissue in working speed, automatically waste picked out. Material splice head, tail material automatic rewind Alarm and stop running automatically when the tissue brokeWhen detect the splice of the tissue,machine automatically waste picked out. Equip with automatic deviation correcting device (no.2), width is 500-700mm (Double electric eyes) Raw material size: width 1500-700mm ,diameter≤800mm,roll diameter is 3inches. Configure the secondary tension 10.Surface Non-woven supply u Double air swelling shaft, use half servo inverter drive (A/B shaft independent control,constant tension control. Splice the tissue in working speed, automatically waste picked out. Material splice head, tail material automatic rewind Alarm and stop running automatically when the tissue broke. When detect the splice of the tissue,machine automatically waste picked out. Equip with automatic deviation correcting device (no.3), width is 850mm,(double electric eye) Raw material size: width 800mm ,diameter≤800mm,roll diameter is 3inches. Configure the secondary tension 11.PE back sheet supply: Double air swelling shaft, use half servo inverter drive (A/B shaft independent control,constant tension control. 12.Automatic alternate use, splice the tissue in working speed, automatically waste picked out. 13.Alarm and stop running automatically when the tissue broke. Material splice head, tail material automatic rewind 14.When detect the splice of the tissue,machine automatically waste picked out. 15.Equip with automatic deviation correcting device no.4, width is 850mm Raw material size: width 800mm ,diameter≤800mm, roll diameter is 3inches Configure the secondary tension 16.product outside cutting device 17.The edge material separation and collection waste device, scrap fan blades use straight leaf form, power 5.5KW 18.Products three rounds of lamination I, by cylinder pressure 19.Product lengthways package,using the guide rod cladding 20.Products rounds of lamination II, by cylinder pressure 21.Product final cutting. 22.After twice of "Three-folding" unit fold,then output finished product 23.One waste exit, Auto waste picked out.(Air-blowing) 24.Finished arrange delivery device used in the form of Hot Wheels, with electric eye counting and cylinder pick-chip functionality. Arranging the rack length is not less than 3m. 25.1)Machine is running by half /full servo conveyor drive.(As required)2)The position of gluing controled on the glue machine control box. 3)Timing belt, synchronous wheel, universal joint drive link 26. 1) Knife make in High-speed steel material 2) Accessories cover treat by nickel-plated 3)Key bearings import NSK Bearings 4) The vacuum in the production process,forming drum device, collecting dust and waste , is disposed centrally fan, suction fan 5) Air passage provided in the top of the device, made of iron pipe, reduce generation of static electricity, high pressure air supply unity, adjustable pressure 6)Air pipe located inside the drive when equipped with unified delivery by the concentration, connect the branch air pipe at the nearest access points. Packaging & Shipping
Company Profile
Our Advantages
MACHINE TEST AT SELLER PLANT AND BUYER PLANT
Test run at seller's site:
The machine will be tested in the Seller plant and all sizes and shapes foreseen in the contract will be tested, at the presence of a Buyer's technician, using raw materials supplied by the Seller.
Buyer's engineers should be at attendance of check & acceptance test according to time and schedule fixed by the Seller. 10 minutes of constant production of the machine for the size need to be done to check the quality, function and production of the machine. To pass the test the efficiency rate has to be more or equal to 85%, while the waste rate has to be less than 2%. Test run certificate need to be signed in duplication by mutual Parties at the end of the test. The signature of the Test run certificate authorizes the shipment of the machine.
Test run at buyer's site:
The final acceptance test to be done in the Buyer's plant and raw materials cost will be at Buyer's charge.Due to the buyer's responsibility (no constant raw materials quality, no on time raw material refurnishing, electrical power supplying problems, and any other factory problems), the machine can not be tested, it will be regarded as passing test run at buyer's site.
Address:
Floor 1-2,No.7,Lane 1088,Mingcheng Rd,Fengxian District,Shanghai,China.
Business Type:
Trading Company
Business Range:
Chemicals, Industrial Equipment & Components, Light Industry & Daily Use, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy, Packaging & Printing, Security & Protection, Service, Toys
Management System Certification:
ISO 9001, ISO 20000, OHSAS/ OHSMS 18001, HSE, QC 080000, GMP, BSCI, HACCP, AIB, ASME
Company Introduction:
Shanghai Miosi Pets Supply Co., Ltd is located in Shanghai, which is near to Shanghai Pudong airport and Shanghai sea port. We are founded in 2015 by a group of active and innovative young people with the aim that serving for world and bringing our products to the global gradually.
We mainly supply pets products:
1. Raw material: Bentonite powder for cat litter; PLA resin for dog poop bag; Guar gum for cat litter;
2. Products: Cat litter, dog poop bag, dog PEE pad, biodegradable bag;
3. Production line: Cat litter production line; Dog poop bag production line; Dog PEE pad production line; Wood shaving machine;
We are committed to the research and development of pet products, we supply pet cleaning raw materials, finished products and production lines.
We have a professional team to provide you with one-stop service, we not only supply products, we also provide technical support services.
We will be your best choice and partner in the field of pet cleaning products.